BEKA BEKA-MAX PICO-troniX1 User Manual

© BEKA 201 !9 All rights reserved
BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410
...a product of
59
16. Code
Pump elements, which are not selectable in the below listed codes, have to be ordered separately
(see chapter 8.4.3 „Order numbers of the pump elements for progressive lubrication systems“ or
chapter 8.4.5 „Code of the pump elements for multi-line lubrication systems“). Please also indicate
the desired installation position per pump element (see fig. 4 in chapter 6.3 „Assembly of the pump
elements“).
16.1 Codefor deviceswith integratedcontrol unitPICO-troniX1
Notice!
2185 . X . X . X . 7X . XXXX
Contruction type no.
Motor voltage 12 V DC 24 V DC
with Hirschmann plug-type connection
with bayonet plug-type connection
12
34
Pump elements*
Outlet position
PE-120 F
PE-120 FV
PE-120 F (pos. ) + PE-120 FV (pos. )410
PE-120 F (pos. ) + PE-120 FV (pos. )10 4
without
4 10 4+10
000
123
456
--7
--8
Reservoir capacity (l)
Effective volume (l)
Version with follow-up piston
1,5
1,2
Version with agitator blade
1
4
Integrated control unit PICO-troniX1
Code no.
7
Special version
Code no.
0000
2185
* with pressure limiting valve
Parameters Time-dependent cycle duration
0,5 - 8 h 1 - 16 min 2 - 32 min 2 - 32 h
Time-dependent
lubrication
1 - 16 min
2 - 32 min
2 - 32 s
Revolution-
dependent
lubr. duration
1 - 16 rev.
10 - 160 rev.
1
2
3
7
8
4
5
6
C
D
A
B
F
G
H
J
K
L
O
Q
170 - 320 rev. 9E IR
duration

BEKA BEKA-MAX PICO-troniX1 Specifications

General

Brand	BEKA
Model	BEKA-MAX PICO-troniX1
Category	Water Pump
Language	English

Summary

1. Technical Data

2. General Safety Instructions

2.1 Safety Warnings and Precautions

Covers general danger symbols, electrical hazards, hot surfaces, and static discharge.

2.2 Staff Qualification and Safe Practices

Outlines necessary qualifications, training, and safe working procedures.

3. Intended Use and Warranty Scope

4. Assembly and Installation

4.1 Connections and Power Supply

Details line connections, power supply requirements, and wiring diagrams.

4.2 Pump Element Assembly

Instructions for disassembling and assembling pump elements, including types.

5. Start Up Procedures

5.1 Lubricant Handling and Filling

Guidelines for lubricant selection, filling the reservoir, and checking the system.

5.2 Rotational Direction Check

Procedure to verify the correct rotational direction of the device.

6. Functional Description

6.1 Lubrication Systems and Device Setup

Overview of lubrication system types and device assembly.

6.2 Pump Elements and Pressure Valves

Details on pump element types, order numbers, and pressure limiting valves.

6.3 Level Monitoring

Explains how level monitoring functions for different device versions.

7. Integrated Control Unit

7.1 PICO-troniX1 Operation and Parameters

Covers functions, operational modes, and parameter settings for PICO-troniX1.

7.2 PICO-tronic Operation and Parameters

Explains functions, modes, special functions, and parameters for PICO-tronic.

8. Maintenance

8.1 Routine Maintenance Tasks

Covers general checks, fitting retightening, and leak inspection.

8.2 Lubricant and Control Unit Management

Procedures for lubricant changes and replacing the control unit.

9. Shutdown and Disposal

10. Troubleshooting

11. Signal Indicators

12. Spare Parts and Drawings

13. Dimensional Drawings

13.1 PICO-troniX1 Drawings

Visual representations of the device dimensions for PICO-troniX1.

13.2 PICO-tronic Drawings

Visual representations of the device dimensions for PICO-tronic.

14. Product Coding

14.1 Coding for PICO-troniX1 and PICO-tronic Devices

Details on determining product codes for devices and their configurations.

14.2 Control Unit Coding

Coding information for PICO-troniX1 and PICO-tronic control units.

15. Declaration of Incorporation

16. For Your Notes

17. Manufacturer Details