BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410
...a product of
© BEKA 201 All !9 rights reserved
38
Settingranges ofthe revolution-dependentlubrication duration:
· 1to 16revolutions (16notches à1 revolution)
· 10to 160revolutions (16notches à10 revolutions)
· 170to 320revolutions (16notches à10 revolutions)
The revolution-dependent lubrication duration can be set (within a setting range) using the left grid switch in the
inspectionwindow ofthe protectivehousing (seefig. 36).
9.1.6 FunctionLevel monitoring
Seechapter 8.6„Level monitoring“.
9.2 PICO-tronic
The can bedetermined or forthe integratedcontrol unitPICO-tronic.cycleduration time- pulse-dependently
The can bedetermined or .lubricationduration time-,pulse- revolution-dependently
Functions:
Thefollowing functionscan beevaluated withthe integratedcontrol unit:
· Systempressure monitoring(monitoring ofthe linepressure inthe lubricationsystem)
· Levelmonitoring (onlyfor deviceswith follow-uppiston, seechapter 8.6„Levelmonitoring“)
· Linebreak monitoring(monitoring ofthe linesin thelubrication system)
The functions and cannot be selected inSLystem pressure monitoring ine break monitoring
the operational mode of and be selectedpulse-dependent cycle duration cannot at the same
time.
Specialfunctions:
Thefollowing specialfunctions canbe usedwith theintegrated controlunit:
· Externalstatus signalas errorsignal (signal,when anerror occurs)orOK-signal (signal,when everythingis alright)
· Adjustmentto operatingconditions
· Cycle locked (lock of the cycle sequence when the machine part or vehicle part, that is to be lubricated, is temporarily
outof order)
The special function and be selectedAdjustment to operating conditions Cycle locked cannot
atthe sametime.
Notice!
Notice!
To Next Page
Loading...
Need help?
General
