© BEKA 201 !9 All rights reserved
BAL2185_Grease_lubrication_pump_PICO_with_PICO-troniX1_-tronic_0519EN 10158410
...a product of
7
Check the surface temperature of the device as a possible heat transfer bears the . Wear heatrisk of burns
resistantprotective gloves!
Openflame andfire arestrictly forbiddenduring maintenance,inspection and repairdue tofire hazard.
2.6 Unauthorizedmodification andproduction ofspare parts
Modification, repair and alterations of the device are only accepted after manufacturer feedback. Original
spare parts safety.and authorized accessories from the manufacturer contribute to The use of other parts
can result inthe loss of any liabilities for the resulting consequences.BEKAdoes not assume liabilityfor parts
thatare retrofitby theoperator.
2.7 Inadmissiblemodes ofoperation
Operational safety of the device is only guaranteed when it is appropriately applied as indicated in the operating and
assemblymanual. Neverexceed orfall belowthe limitvalues, asstatedin thetechnical data.
2.8 Electrostaticdischarge
Avoid electrostatic discharge! There are electronic components integrated into the devices which might be
destroyed by electrostatic discharge. Observe the safety precautions against electrostatic discharge
according to DIN EN 61340-5-1/-3. Ensure that the environment (persons, workplace and packing) is well
groundedwhen handlingthese devices.
2.9 Generalhazard warning– residualrisk
All components are designed according to valid regulations for the construction of technical systems with
regard to operational safety and accident prevention.Nevertheless, their use canlead to hazards forthe user
or thirdparties aswell asother technical facilities.Therefore, thedevice may onlyfulfill itsintended purposein
a . This has to happen in adherence to the relevant safetytechnically perfect and faultless condition
regulations as well as the operating and assembly manual. the device and its attachment partsInspect
regularly check damage leakages. Liquids escape under high pressureand them for possible or could
frompressurized componentswhich becomeleaky.
To Next Page
Loading...
Need help?
General
