3-2
3.2.1 List of outputs
Action Output Requirements Template
A0 Wireless Network requirements
for Mindray patient monitors
Determine requirements for deployment of
the wireless network for Mindray patient
monitors.
Wireless Network Requirement
Table in 3.3 Network
Requirements
A3 Network acceptance report Confirm that the customer network meets
requirements of Mindray patient monitors by
means of questionnaire and measurement.
Wireless Network Acceptance
Table in 3.4.3 Network
Verification Process
A5 Installation confirmation report Confirm the actual operation of the Mindray
patient monitors after installation.
Patient Monitor Installation
Confirmation Table in 3.5 Network
Coverage Assessment with
Patient Monitors
If the hospital plans to build a new WLAN for the Mindray patient monitors, make sure that there is at least one idle Wi-Fi
channel that is not in use. Otherwise, you can’t make co-channel interference meet Mindray patient monitors’
requirement after the new WLAN is built. The installation process is illustrated as follows:
Mindray/agent
marketing or sales
personnel
Mindray
headquarters
Mindray/agent
service personnel
A1 Communicate with
the hospital about
intention to order
A5 Install the device
and confirm system
operation
A0 Provide network
requirements
A4 Install network
A2
Do site survey and
design network
A3 Sign the contract
To Next Page
Loading...