BeneVision N17 - Upgrade of Functional Assemblies

6-3
6.3 Upgrade of Functional Assemblies
NOTE
 When upgrading the wireless network, analog output and CIS function for a patient monitor with standard
configuration, you have to replace old PCBAs in the patient monitor with corresponding PCBAs included in
the upgrade kit and remove the covers of related connectors in addition to installing the corresponding
functional assemblies in the monitor.
You can upgrade the following functional assemblies for this monitor: the satellite module rack (SMR), wireless
network functional assembly, MPAN, recorder, independent display assembly, iView system functional assembly, etc.
Functional Assembly PN Name and Specification Remarks
SMR
115-037384-00 SMR material package (2m/without handle and hook)
115-033887-00 SMR material package (2m/with handle and hook)
115-033888-00 SMR material package (10m/with handle and hook)
Recorder 115-044523-00 Recorder upgrade package
Wifi 115- 115-04452 Wi upg2.4G/5G radefi package
MPANN 11AN 115-04 MP4 upgradeAN package
iView
115-044553-00 iView upgrade package (Without MainBoard)
115-044578-00 iView upgrade package (MainBoard)
Independent Display
115-044554-00 ID upgrade package (Without MainBoard)
115-044579-00 ID upgrade package (MainBoard)
N12 Upgrade package
(DVI&TDS&BNC)
115-044508-00 Upgrade package (DVI&TDS&BNC)
This monitor is configured with wireless network functions and can be connected to network through wireless AP. To
upgrade wireless functions, ask authorized personnel of our company to connect and set up the wireless network,
and then carry out the performance test.