BeneVision N17 - Page 76

6-2
6.2 Upgrade of Parameter Function Modules
You can upgrade the following parameter modules:
Monitoring Parameter
Module
PN Name and Specification Remarks
MPM module 115-038696-00 MPM-1 Module (MR Spo
2
/3/5 lead/IBP)
115-038697-00 MPM-3 Module (NC Spo
2
/3/5 lead/IBP)
115-044666-00 MPM-7 Module (MR Spo
2
/3/5lead/No IBP)
115-044667-00 MPM-9 Module (NC Spo
2
/3/5lead/No IBP)
115-038698-00 MPM-13 (MR SpO
2
/12lead/IBP/Analog)
115-038699-00 MPM-14 (NC SpO
2
/12lead/IBP/Analog)
115-038700-00 MPM-13 (MR SpO
2
/12lead/IBP/Analog)
115-038701-00 MPM-14 (NC SpO
2
/12lead/IBP/Analog)
IBP module 6800-30-50850 IBP Module (Package/no accessory)
C.O. module 115-015238-00 CO Module kit (M03B V2.0) No accessory
CO
2
module 115-013200-00 CAPNOSTAT CO
2
(Package/no accessory)
115-013201-00 ORIDION CO
2
(Package/no accessory)
115-034095-00 CO
2
+O
2
Module (package/ Adu accessory)
115-037385-00 One-slot CO
2
_O
2
module
AG module 115-034108-00 AG Module (package/no accessory)
115-034109-00 AG Module (O
2
/package/no accessory)
115-034110-00 AG Module (BIS/package/no accessory)
115-034111-00 AG Module (O
2
/BIS/package/no accessory)
ICG module 115-034123-00 ICG Module (package/ no accessory)
BIS module 115-013194-00 BIS Module (Package/no accessory)
RM module 115-034114-00 RM Module (package/no accessory)
SPO
2
module 115-015015-00
SPO2 Module (MS-2013，No accessory)
115-034088-00 SPO2 Module NC (package/ no accessory)
115-015016-00 SPO
2
Module (9008 V2.0, No accessory)
CCO/SvO
2
module 115-013196-00 CCO/SvO
2
Module (Package/no accessory)
PiCCO module 115-013196-00 PiCCO Module (Package/no accessory)
ScvO2 module 115-013199-00 SCVO2 Module (Package/no accessory)
EEG module 115-018353-00 EEG Module (Package/without accessory)
NMT module 115-020916-00 NMT Module (Package/no accessory)
Benelink module 115-038771-00 Benelink Module International (Package)
rSO
2
module 115-037264-00 rSO
2
module
TEMP module 115-039492-00 Temp module (package/no accessory)
Infrared ear Temp module 115-044684-00 Infrared ear Temp (no accessory/package)
You can insert and remove all the parameter modules during patient monitoring. Refer to the BeneVision N Series
Patient Monitor Operator's Manual (P/N: 046-009995-00) for the use of parameter modules.