3-9
Parameter Recommended Setting Comments
A Channel Specified Options are: All, Specified, None.
Specifying the channels improves stability and roaming
performance by restricting the channels scanned to only those
specified.
The 5GHz channel settings on the monitor must match the WLAN AP
channel settings.
Main Menu→Maintenance→User Maintenance→Network Setup→WLAN→Certificate Management
Local / Display the existing EAP certificates in a patient monitor
USB Drive / Display the existing EAP certificate in the USB drive
Main Menu→Maintenance→Factory Maintenance→Setup→WLAN Setup
Regulatory
Domain
Worldwide Korea, Turkey, Russia, and Brazil need to be configured separately.
For other countries, just choose worldwide.
You need to restart the monitor for the monitor settings to take
effect.
CCX Features Support This means that it supports CCX 4.0 and fast roaming
PMK Caching Standard Options are: Standard, OPMK.
Standard indicates PMK caching.
OPMK indicates opportunistic key caching.
Trigger -70 When the RSSI is lower than the roam trigger, the radio will try to
roam.
Scan Period 5 When the RSSI is lower than the roam trigger, the period of the
probe request is 5s.
Patient monitor support the following security modes:
Menu Selection Basic Algorithm Authentication Mode Encryption CCKM Support
WPA PSK WPA PSK TKIP/RC4 No
WPA2 PSK WPA2 PSK CCMP/AES No
WPA PSK AES WPA PSK CCMP/AES No
WPA TKIP WPA EAP TKIP/RC4 No
WPA2 AES WPA2 EAP CCMP/AES No
WPA AES WPA EAP CCMP/AES No
CCKM TKIP CCKM EAP TKIP/RC4 Yes
CCKM AES CCKM EAP CCMP/AES Yes
After Security Mode of EAP is selected, corresponding configuration item will be displayed. The following table lists the
configuration items for different EAP methods.
Identity Anonymity Password CA Certificate User
Certificate
PAC
Certificate
PAC
password
PEAP-
MSCHAPV2
Y O Y Y N N N
PEAP-GTC Y O Y Y N N N
PEAP-TLS Y O Y Y Y N N
TTLS Y O Y Y N N N
TLS Y N Y Y Y N N
To Next Page
Loading...