Bernina 780 - Fill Stitch Types; Changing Stitch Types

168
Embroidery motifs
Altering stitch density
⦁
touch «+»/«-»-icon or turn stitch length knob to the left or to the right
►
the stitch density is increased (more stitches)/decreased (less stitches)
The maximum stitch density is 300% and the minimum 25%.
⦁
touch - icon
►
chosen stitch density is saved and «Edit»-display appears
Back to basic settings
⦁
touch the yellow-framed icon
►
the basic setting (100%) of the motif is activated again
Fill stitch types
The embroidery motifs are filled with satin or step stitches.
Satin stitch
The needle moves left to right and vice versa.
Step stitch (Fill stitch)
The needle stitches in straight rows at regular intervals.
⦁
touch «Change stitch type»-icon
Changing stitch type
The satin stitch fill changes to a maximum of 8 mm long step stitches fill (basic
setting).
►
touch «+»/«-»-icon or turn stitch width knob to the left or to the right
►
maximum step stitch length is increased/decreased
The maximal step stitch length is 12.7 mm and the minimal length 0.5 mm.
⦁
touch - icon
⦁
chosen step stitch length is saved and the «Edit»-Display appears
Back to basic settings
⦁
touch yellow-framed icon
►
the basic setting (8 mm) is activated
Back to satin stitch
⦁
touch «Change stitch type»-icon again
►
the motif is filled with satin stitches again
033804.52.04_2013-09_Manual_B780_EN