Bernina 780 - Contents Sewing; Table of Contents

4
Contents Sewing
Safety Instructions 2
Environmental Protection 3
Key to Signs 8
Glossary 8
Breadcrumb navigation 8
Accessory 9
Standard Accessories 9
Presser feet 10
Accessory box free standing 11
Overview sewing computer 12
Front view 12
Detail view 12
Important Sewing information 14
Thread 14
Needle, thread and fabric 14
Needles, threads 15
⦁
Correct needle/Thread combination 15
⦁
Too thin thread or too thick needle 15
⦁
Too thick thread or too thin needle 15
Overview needles 16
Sewing preparation 17
Power Switch/Power Cable 17
Magnetic holder for Touchscreen pen 17
Foot control 17
Slide-on table 18
⦁
Seam guide 18
Presser foot lifter 18
Vertical spool pin 19
Winding the lower thread 20
⦁
Bobbin winding while sewing 20
Inserting a bobbin/Threading lower thread 21
⦁
Removing the bobbin from the bobbin case 21
Removing/inserting bobbin case 21
Threading the upper thread 22
Changing the needle 22
Threading the double needle 23
Threading the triple needle 23
Thread needle 24
Changing the presser foot 24
Stitch plate 25
⦁
Marks on the stitch plate 25
⦁
Removing the stitch plate 25
⦁
Replacing the stitch plate 25
Thread tension 26
⦁
Altering upper thread tension 26
⦁
Saving the upper thread tension 26
⦁
Back to basic settings 26
Security Program 27
⦁
Display 27
⦁
Selecting the needle 27
⦁
Selecting the stitch plate 27
⦁
Saving 27
Needle Chart 27
⦁
Selecting needle 27
Selecting a Presser Foot 28
⦁
Display 28
⦁
Optional presser feet 28
⦁
Saving 28
⦁
Return to basic settings 28
Altering presser foot pressure 29
⦁
When sewing thick material, e.g. quilting 29
⦁
Saving presser foot pressure 29
⦁
Resetting the basic setting 29
Feed dog and Fabric feed 30
Feed dog lowered/ready to sew 30
Functions 32
Overview «Function»-buttons sewing 32
⦁
«Start/Stop»-button 32
⦁
«Presser foot position»-button 32
⦁
«Automatic thread cutter»-button 32
⦁
«Quick reverse»-button 32
⦁
«Pattern begin»-button 32
⦁
«Needle stop»-button 32
⦁
Programmable «Pattern end-/Securing»-button 32
⦁
Slide speed control 32
⦁
«Automatic Securing Program»-button 33
⦁
Stitch width and Stitch length Knobs (Multifunction) 33
⦁
«Needle position»-buttons 33
⦁
Needle stop position up and
«Quick reverse»-button 33
⦁
Needle stop position down and
«Quick reverse»-button 33
Display 34
Overview Main Display 34
⦁
System settings 34
⦁
External Functions/Views 34
⦁
Menu Selection 34
⦁
Selection 35
⦁
Stitch Pattern Area 35
⦁
Stitch Pattern Display 35
Functions - Display 36
Sewing Functions Overview 36
General Functions 36
Overview Functions buttonholes 38
Overview Functions Alphabets 39
Overview Functions Combi mode 40
Setup Program 44
Overview «Setup»-Display 44
Contents Sewing
033804.52.04_2013-09_Manual_B780_EN