36
Functions - Display
3
7
11
4
6
5
8 9
10 12 13
Functions
1 Needle stop up/down
2 Pattern repeat
3 Long stitch
4 Mirror Image left/right
5 Mirror Image up/down
6 Altering pattern length/Stitch density
7 Stitch Counter
8 Balance
9 Multi-Directional sewing
10 Permanent reverse sewing
11 Backstepping
12 Personal memory permanent
13 Basic setting stitch pattern
Functions - Display
Sewing Functions Overview
⦁
touch «i»-icon
►
«Function»-Display appears
Needle stop up/down (permanent)
⦁
touch icon
►
the needle symbol jumps down
►
the sewing computer stops with needle down
⦁
touch the icon again
►
the needle symbol jumps up
►
the sewing computer stops with needle up
Pattern repeat
⦁
touch icon 1x
►
number 1 appears: the sewing computer stops at
the end of an individual stitch or a stitch
combination
⦁
touch icon 2-9x
►
numbers 2-9 appear: the sewing computer stops at
the end of an individual stitch pattern or a stitch
combination after the number of repeats selected
Long stitch
the sewing computer sews every second stitch
(max. stitch length 12 mm)
applicable for practical and decorative stitches
Exception: buttonholes, alphabets
Mirror Image left/right
The sewing computer sews the stitch pattern mirrored,
left/right referring to the sewing direction.
Mirror Image up/down
The sewing computer sews the stitch pattern mirrored
up/down referring to the sewing direction.
2
1
General Functions
Information
⦁
touch the icon
►
another Display is opened
Back
⦁
touch the icon
►
the previous Display appears
►
any alterations are accepted
Confirming selection
⦁
touch the icon
►
alteration/selection is activated or confirmed
Leaving the active Display
⦁
touch the icon
►
the Display is closed
►
the previous Display appears
To Next Page
