18
Sewing preparation
The slide-on table increases sewing surface.
Attaching the slide-on table
⦁
turn the handwheel or press the «Needle stop»-button (see page 13)
►
needle is raised
⦁
press «Presser Foot Position»-button
►
presser foot is lifted
⦁
slide table to the right, over the free arm until it engages
Removing the slide-on table
⦁
raise the needle and presser foot
⦁
press button 1 down
⦁
pull slide-on table to the left
Slide-on table
Presser foot lifter
Raising or lowering presser foot via FHS.
Attaching the Free Hand System
⦁
insert into the opening 1
Raising and lowering the presser foot
⦁
with your knee push lever to the right
⦁
you should be able to operate the FHS with your knee in your normal sitting
position
►
the presser foot is raised; the feed dog is lowered simultaneously. The
thread tension is released
►
the feed dog is raised as soon as the first stitch is sewn
Your dealer can adjust the FHS if necessary.
Seam guide
⦁
press the release button and insert into the groove (underside of table) from
left or right
Can be moved over the entire table length.
1
1
To Next Page
