Bernina 780 - End of Embroidery; Embroidering with Foot Control; Interrupting the Process; Completing the Color

179
Embroidery motifs
End of embroidery
⦁
after completing the motif touch the icon 1 to finish the embroidery process,
or touch «Endless Embroidery»-icon 2 again to repeat the border
embroidery
1 2
When embroidering with the foot control always keep it depressed.
⦁
press the foot control
►
the embroidery computer sews approximately 7 stitches and stops
automatically
►
a Display indicates that the thread tail has to be cut at the beginning of the
motif
⦁
release the foot control
⦁
raise the presser foot
⦁
cut the thread tail at the beginning of motif
⦁
press the foot control and continue embroidering
Interrupting the process
⦁
release the foot control
►
the embroidery computer stops
Completing the color
⦁
press the foot control
►
the embroidery computer embroiders all the sections in the color activated
►
the embroidery computer stops automatically when complete
►
both threads are automatically cut
Color change
►
the emboidery computer switches automatically to the next color
⦁
change color of the upper thread accordingly
⦁
embroider with the new color
Embroidering with foot control
«Embroidery»-Display
►
after starting the motif the «Embroidery»-Display appears
Embroidering via the foot control is recommended to embroider a
small sequence.
033804.52.04_2013-09_Manual_B780_EN