Bernina 780 - Correcting a Stitch Pattern Combination

125
Combi Mode
Correcting a stitch pattern combination
Inserting a stitch pattern
⦁
select the desired position in the combination or in the Editing Area
⦁
select a new stitch pattern
►
the new stitch pattern is inserted below the selected stitch pattern
To insert a stitch pattern at the beginning of a combination the cursor must be
positioned above the first stitch pattern.
Altering stitch patterns
⦁
select the desired stitch pattern in the combination
⦁
touch «i»-icon
⦁
select desired function, e.g. Mirror Image left/right
►
the stitch pattern is mirrored left/right
⦁
touch «Close»- or «i»-icon
The alterations always affect the stitch above the cursor. Saved
stitch combinations can be altered or corrected in the same way. To
make corrections and alterations permanent, the combination must
be saved again afterwards.
Adjusting the length within the combination
The length of all stitch patterns within a combination can be adjusted to the
longest stitch pattern.
⦁
touch «i»-icon
⦁
touch «Edit whole combination»-icon
⦁
touch «Stitch length scale»-icon 1
►
the «Stitch length»-Display appears
⦁
touch «Length adjustment in combination»-icon 2
►
the length of all the stitch patterns is adjusted to the longest stitch pattern
within the combination
2
1
033804.52.04_2013-09_Manual_B780_EN