32
Functions
Functions
Overview «Function»-buttons
«Start/Stop»-button
starts and stops the sewing computer when
operating with or without foot control
starts and stops the BSR-Function if the BSR
foot is attached and activated
«Presser foot position»-button
⦁
press the button
►
the presser foot is lowered and lifted a bit
again for easy positioning of the material
►
the presser foot is lowered on the fabric when
start sewing
⦁
press the button again
►
the foot is lifted
«Quick reverse»-button
secures the seam beginning and end: sews in
reverse as long as the button is pressed
used to program the buttonhole length
used to program the darning length
used to determine end of stitching in straight
stitch Securing Stitch No. 5
used for securing in Quilters securing program
No. 1324
«Automatic thread cutter»-button
the upper and the lower threads are cut
automatically
2-6 securing stitches can be programmed in
the setup program. These are sewn before the
thread is cut
Slide speed control
the sewing and embroidering speed is infinitely
variable with the slide
«Needle stop»-button
⦁
press the button
►
the needle is raised or lowered in the same
way as by sinking the heel back on the foot
control
Programmable «Pattern end-/Securing»-button
⦁
press button before or during sewing
►
single pattern is secured at the end, with the
selected number of stitches programmed
⦁
press button before or during sewing of a
combination
►
the active pattern of the combination is
secured at the end, with the selected number
of stitches programmed
⦁
the number and type of the securing stitches
can be programmed in the setup program
►
a stop symbol which appears during sewing
indicates that the function is activated
«Pattern begin»-button
the needle moves to the beginning of a stitch
pattern or program
To Next Page
Loading...
