33
Functions
Stitch width and Stitch length Knobs
(Multifunction)
to adjust stitch width or stitch length
to alter thread tension
to set the buttonhole slit width or the button
size
to adjust the balance
various alterations in the setup program
various alterations when embroidering
«Needle position»-buttons
⦁
press the left button
►
needle moves to the left
⦁
press the right button
►
needle moves to the right
⦁
keep button pressed
►
quick change
total of 11 needle positions (5 left, 5 right,
1 center = 0)
«Automatic Securing Program»-button
►
press the button before sewing start = the
individual pattern/combination is secured at
the beginning with the number of programmed
stitches
►
keep the button pressed while sewing = the
sewing computer stops at once and sews the
number of programmed stitches
►
the number and type of the securing stitches
can be programmed in the setup program
Needle stop position up and «Quick reverse»-
button
If «Quick reverse»-button is pressed while sewing
or after stopping (e.g. zig-zag) with programmed
needle stop up, the sewing computer sews one
stitch forward before it switches to sewing in
reverse.
Needle stop position down and «Quick
reverse»-button
If «Quick reverse»-button is pressed after stopping
(e.g. zig-zag) with programmed needle stop
down, the sewing computer switches to sewing in
reverse immediately.
To Next Page
Loading...
