126
Combi Mode
Mirroring complete combinations
⦁
touch «i»-icon
⦁
touch «Edit whole combination»-icon
⦁
touch «Mirror Image»-icon
►
the complete combination is mirrored
⦁
touch «Close»- or «i»-icon
Combination subdivider 1
⦁
touch «i»-icon
⦁
touch «Edit combination at cursor position»-icon
⦁
touch «Subdivide combination 1»-icon
⦁
a combination can be subdivided into several sections with the
«Subdivider 1»-function
►
only the section where the cursor is positioned is sewn
⦁
to sew the next section, the cursor must be placed in the respective section
Combination Subdivider 2
⦁
touch «i»-icon
⦁
touch «Edit combination at cursor position»-icon
⦁
touch «Subdivider 2»-icon
⦁
a combination can be interrupted at any position using
«Subdivider 2»-function
⦁
sew the first section
►
the sewing computer stops automatically when it reaches the programmed
function
⦁
reposition the fabric
⦁
sew the next part etc.
Adjusting the width within the combination
The width of all stitch patterns within a combination can be adjusted to the
widest stitch pattern.
⦁
touch «i»-icon
⦁
touch «Edit whole combination»-icon
⦁
touch «Stitch width scale»-icon 3
►
the «Stitch width»-Display appears
⦁
touch «Width adjustment in combination»-icon 4
►
the width of all the stitch patterns is adjusted to the widest stitch pattern
within the combination
4
3
To Next Page
Loading...
