47
Setup Program
►
with activated icon 14, the presser foot remains down when the sewing
computer stops
►
with activated icon 15, the presser foot is raised enough to pivot the fabric
(hover position)
►
with activated icon 16, the presser foot is raised into its highest position
►
with activated icon 17 the sewing computer sews in continuous reverse
when pressing «Quick reverse»-button
►
with activated icon 18 the sewing computer sews backwards stitch-by-stitch
when pressing «Quick reverse» button
The number and type of the securing stitches can be programmed using the
«Securing»-button.
►
standard = four securing stitches in the same place
⦁
select function 19 for small securing stitches sewn in a forward direction
⦁
via «+»/«-»-icons two to six securing stitches can be programmed
15
Presser foot position with needle stop down
⦁
touch «Presser foot position»-icon
Programming «Quick reverse» button
⦁
press «Quick reverse»-button
Programming «Securing»-button
⦁
touch «Securing Button»-icon
14 15
17
19
18
16
To Next Page
