90
Buttonholes
Buttonhole with double pointed bartack No. 66 and
decorative buttonhole with double pointed bartack No. 69
5432
1
Programming the buttonhole
1
⦁
sew the first bead forward
⦁
stop the sewing computer
⦁
press «Quick reverse»-button
►
«auto» and the programmed length (in mm) appears in the Display
►
the buttonhole length is programmed
The sewing computer sews autmatically:
2 straight stitches in reverse
3 the upper pointed bartack/bartack
4 the second bead forward
5 the lower pointed bartack/bartack and the securing stitches
►
the sewing computer stops and returns automatically to buttonhole
begin
Auto buttonhole
►
all subsequent buttonholes will be sewn to exactly the same length (no
need to press «Quick reverse»-button)
⦁
the programmed buttonholes can be saved in the long-term memory (see
page 92)
⦁
press the «clr»-button
►
the programmed settings are cleared
To Next Page
Loading...
