BERNINA International AG Seestrasse 161 CH-8266 Steckborn Schweiz Seite 102 von 172
DRAFT – VERSION
Adjusting main feed-dog rear height
• Position feed-dog height gauge 398024.03.1+ onto last row of teeth.
• Untighten three setscrews d (T8) in the lower part of the pusher fork.
• On the right, move eccentric shaft e into required position with open-end wrench 6.
• Retighten three setscrews d (T8).
• Recheck setting.
• Repeat adjustment if necessary.
To Next Page
