Bernina B 570 - Main Feed-Dog and Feed-Dog Carrier

BERNINA International AG Seestrasse 161 CH-8266 Steckborn Schweiz Seite 61 von 172
DRAFT – VERSION
4.3.2 Main feed-dog and feed-dog carrier
Disassembly:
• Remove presser foot and needle.
• Remove stitch plate.
• Remove the covers (see 4.1
)
• Picture 1 – Remove spring A
• Remove main feed-dog carrier (see 4.3.8
).
• Picture 2 - Remove the two screws 1 (T10) to
remove the main feed-dog.
•
Assembly:
• Picture 2 – Refit main feed dog with 2 screws 1
(T10).
• Refit main feed-dog carrier with refitted main feed
dog (see 4.3.8
).
• Adjust main feed-dog (see 5.6).
• Refit covers (if appropriate) (see 4.1)
• Refit stitch plate.
• Attach needle and presser foot.
Note:
The main feed dog could be removed also after removing
the main feed dog carrier.