BERNINA International AG Seestrasse 161 CH-8266 Steckborn Schweiz Seite 145 von 172
DRAFT – VERSION
a
2. The number 9 (preferred)
Check:
• Attach foot 1C.
• Thread machine and place two-layered sewing-off
cotton under the presser foot.
• Feed-dog in the up position (normal sewing).
• Select the number 9 to stitch it.
• The 9 must be stitched without gaps between the
stitched lines.
Adjust:
• Turn balance adjusting cam a (T 10, blade length at least 110mm) until
the number 9 is stitched properly.
3. Leaf pattern
Check:
• Attach foot 1C.
• Thread machine and place two-layered sewing-off
cotton under the presser foot.
• Feed-dog in the up position (normal sewing).
• Select the leaf to stitch it.
• The leaf pattern outline must be stitched in such way
that the stitching line ends meet exactly.
Adjust:
• Turn balance adjusting cam a (T 10, blade length at
least 110mm) until the leaf pattern is stitched properly.
Note:
• Rotate balance cam a clockwise = the leaf pattern pulls together
• Rotate balance cam a counterclockwise = the leaf pattern pulls apart.
Counterclockwise rotation
Clockwise rotation
OK
+ b
a
To Next Page
