PRC MBR TYP ITM MSK Data Comment
00 00 00 00 --- ----------- and TDV=0000, DevID will be send
00 01 00 00 --- NN Current detector index (1..N)
00 01 01 00 --- NN Brightness of display (1,2,3)
00 01 02 00 --- ----------- Read Date Time
00 01 02 00 --- dd/mm/yy hh.mm.ss Set Date Time
03 00 --- NN Set language (1 = deu, 2 = engl)
04 00 --- NN Set autosave (0, 1)
05 00 --- NN Set autosend data (0, 1)
06 00 --- NN Set memory as FIFO/fixed (0, 1)
07 00 --- NNNN Set Device Address
08 00 --- NN Set opti alarm (0, 1)
08 01 --- NN Set acousti alarm (0, 1)
08 02 --- NN Set vibration alarm (0, 1), not implemented
09 00 --- NNNN Set timeout device (min)
10 00 --- NN Set battery type (0=batt, 1=accu)
11 00 --- NN Set charge mode (0, 1)
11 01 --- NNNN Set charge time (min)
12 00 --- NNNNNN Set serial number device as ULONG
13 00 --- NN Set baud rate (1,2,3,4,5)
14 00 --- NN Number of implemented detectors
(read only)
FIFO operations
01 01 01 00 --- ----------- Read current measured data from FIFO (WR)
01 01 01 01 --- ----------- Read oldest measured data from FIFO (RD)
01 01 01 02 --- ----------- Increment read pointer and read oldest FIFO status
04 --- ----------- Reset Fifo (Reset RD/WR Pointer)
07 --- ----------- Read status
08 --- ----------- Store current value
05 --- ----------- Read number of measured data in FIFO
06 --- ----------- Set read marker back by 1 for
09 --- ----------- Read all FIFO data
10 --- ----------- Reset read pointer (RD)
Background
01 02 01 00 --- ----------- Start background measurement
01 ----------- Stop background measurement
02 ----------- Send backgrounds (2 values)
Sample measurement
01 03 01 00 --- ----------- Start sample measurement
01 ----------- Stop sample measurement
02 ----------- Read current measured data
(Measurement)
Integration
01 06 01 00 --- ----------- Start integral calculation
01 06 01 01 --- ----------- Stop integral calculation
01 06 01 02 --- ----------- Reset integral value and I-time
To Next Page
Loading...
