"α-tot" and " -tot". In addition, it includes the units Net [cps]
and Gross [cps] for alpha and beta-gamma SOURCES.
The following information is included for each nuclide: name,
active, radiation type, mass number, unit, two calibration factors
A-100 (according to DIN 25415) and ISO (according to DIN ISO
7503-1), one alarm threshold for the measured value, one
alarm threshold for the integral value, the unit for the integral
value and the time base for the integral calculation that can be
edited by the user.
Figure 6.12: Nuclide parameters for contamination probe
To Next Page
Loading...
