Binder KBF P 240 - Ethernet

KBF P + KBF LQC + KBWF (E6) 11/2016 page 121/189
“Serial interfaces” submenu.
Select the field “Device address”.
“Device adress” entry menu
Enter the device adress and press the Con-
firm icon.
Factory setting: “1”.
15.5.2 Ethernet
15.5.2.1 Configuration
Path: Main menu > Settings > Ethernet
“Ethernet” submenu.
In the field “IP address assignment” select the desired
setting “Automatic (DHCP)“ or “Manual“.
With selection „Manual“ you can enter the IP-address,
the subnet mask and the standard gateway manually.
“Ethernet” submenu.
Select “DNS device name”.
“DNS device name” entry menu.
Enter the DNS device name and press the
Confirm icon.