Binder KBF P 240 - Set-Point Entry through the Setpoints Menu

KBF P + KBF LQC + KBWF (E6) 11/2016 page 53/189
8.1 Set-point entry through the “Setpoints” menu
Press the Setpoint setting icon to access the “Setpoint” setting menu from Normal display.
Press the Back icon to go return to Normal display from any menu.
“Setpoints” menu.
Select “Fixed value operation setpoints”.
Display with KBF P / KBWF
Display with KBF LQC
Select the parameter to enter the setpoint.
“Temperature” entry menu.
Enter the desired setpoint and press the
Confirm icon.
“Humidity” entry menu.
Enter the desired setpoint and press the Con-
firm icon.