DiBos/DiBos Micro Default Configuration | en 105
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
LDAP server settings
1 LDAP server: Name or IP address of the LDAP server.
2 Port Port number of LDAP server (Default: unencrypted = 389;
encrypted = 636)
3 Activate encryption For encrypted data transmission.
4 LDAP basis for users: Unique name (DN = distinguished name) of LDAP path in
which the search for the user should be performed.
Example:
Ask your IT administrator for the unique name (DN) of the
LDAP basis.
For example, you receive the following DN:
CN=Users,DC=Security,DC=MyCompany,DC=com
5 Filter for users: Filter for searching for unique user name.
Example:
Ask your IT administrator for the filter to find a user with the
user ID xy in the LDAP server.
For example, for user xy, you receive the following filter:
(|(sAMAccountName=xy)(userPrincipleName=xy)
Replace xy with %username% and enter the filter.
6 LDAP basis for groups: Unique name of LDAP path in which the search for groups
should take place.
7 Filter for group
members:
Filter used to search for group members of a group.
Example:
Ask your IT administrator for the filter to find user xy with his
DN (e.g.
CN=xy,CN=Users,DC=Security,DC=MyCompany,DC=com) in
the LDAP server.
For example, you receive the following path:
(&(objectclass=group)(member=DN)
Replace DN with %usernameDN% and enter the path.
Proxy user
8 User name (DN): Unique name of proxy user.
9 Password: Proxy user password.
10 Testing Tests whether the proxy user has access to the LDAP server.
Test user
authentication and
group association
11 User name: User login ID, e.g. userB. The DN should not be entered here.
12 Password: User password.
13 Testing Tests whether the user ID and password are correct.
14 Group (DN): Unique group name. Used to check with which group the user
is associated.
15 Testing Tests the group association of the user.
To Next Page
Loading...
