42 en | Default Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
6.2 Configuring Video and Audio Connections
Video and audio connections menu
Automatic recognition of locally connected components
X Click Update in the Automatic recognition section. Locally connected grabbers and
analog cameras are recognized by the system and shown graphically in the connection
overview.
Adding grabbers
1. Select a grabber in the connection overview.
2. In the Grabber section, click Add. A dialog box for grabber selection appears.
Adding cameras or audio inputs
1. In the selection overview, select the grabber to which you want to add cameras or audio
inputs.
2. In the Camera or Audio input section, click Add. A dialog box for camera or audio
selection appears.
Connection overview Right side of dialog box
Gives you an overview of the local system:
– Number of active grabber cards with the
cameras and audio sources connected
to them
– Number of configured network devices
(IP cameras)
Grabbers, cameras, audio sources, monitors
and IP cameras can be added, edited or
removed.
To Next Page
Loading...
