DiBos/DiBos Micro Quick Configuration | en 33
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
5.2 Creating a User
System menu > Configuration wizard > Next
On an initial installation, 3 authorization levels and 3 users are automatically created. These
cannot be deleted.
Proceed as follows to create a new user:
1. Create a new user by entering Name and Password in the corresponding authorization.
Make a note of the name and password, as you will need it afterwards to log on.
2. Enter the same password again under Repeat password.
3. Click Next to call up the next page of the wizard or Finish to save the entries and exit the
wizard.
1 Administrator: Possesses all rights concerning operation and configuration of
the system.
2 Extended user: Possesses all rights concerning operation of the system. He
possesses no rights for configuring of the system. An
exception is the right to create a Normal user.
3 Normal user: Possesses all rights concerning operation of the system. He
possesses no rights for configuration.
4 Finish Saves the settings and finishes the wizard.
Next Click Next to continue.
NOTICE!
By default, no password is assigned for the authorization levels.
To Next Page
Loading...
Need help?
General
