DiBos/DiBos Micro Default Configuration | en 69
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
6.3.3 Configuring Recording Settings of MPEG4 IP Cameras
Recording settings menu > MPEG IP cameras tab
You can configure the recording settings for the MPEG4 IP camera in this dialog box.
1 Day I Night I Weekend ... All configured time profiles are displayed as tabs.
Select the time profile to which the settings should apply.
Note:
Only the time profiles configured under Time periods are
displayed.
2 MPEG IP cameras Select the tab. All MPEG IP cameras are displayed in the
list field underneath.
3 In the camera list field Select the camera for which you want to edit the settings.
4 Pre-alarm recording Make the settings for pre-alarm recording.
Stream Select the stream for the MPEG4 device (Stream 1 or
Stream 2).
Audio Activate this check box if audio is also to be recorded.
Note:
Audio can only be selected if the Activate audio input
check box is selected under Video and audio connections
MPEG4 IP cameras - Modify General settings.
To Next Page
Loading...
