DiBos/DiBos Micro Default Configuration | en 77
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
6.5.5 Configuring Automatic Teller Machines
Inputs and outputs menu > Automatic teller machine tab
A maximum of 4 automatic teller machines, each with 2 inputs, can be connected to one video
system.
1 Automatic teller machine Click the tab.
2 Interface: Select the interface.
3 Status query [h]: After this time interval, the system checks repeatedly
whether the connected automatic teller machines
have completed a transaction. Enter the time in
hours. Example: Entering 2 would mean that a check
is run every 2 hours. Entering 0 would mean that no
check is run.
Note:
If the system does not display a transaction, an error
message is sent. If the connection between DiBos and
the automatic teller machine is faulty, another error
message is sent.
4 Type Click the down arrow in the column and select
whether an input is to be configured or not.
The input is assessed.
The input is not assessed.
To Next Page
Loading...
Need help?
General
