EasyManua.ls Logo

Bosch DB18C3100R2 - Configuring Recording Settings of JPEG IP Cameras

Bosch DB18C3100R2
158 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DiBos/DiBos Micro Default Configuration | en 67
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
6.3.2 Configuring Recording Settings of JPEG IP Cameras
Recording settings menu > IP cameras tab
You can configure the recording settings for the JPEG IP camera in this dialog box.
1 Day I Night I Weekend
...
All configured time profiles are displayed as tabs.
Select the time profile to which the settings should apply.
Note:
Only the time profiles configured under Time periods are
displayed.
2 IP cameras Select the tab. All JPEG IP cameras are displayed in the list
field underneath.
3 In the camera list field Select the camera for which you want to edit the settings.
4 Pre-alarm recording Make the settings for pre-alarm recording.
Rate: Select the recording rate.
Note:
The actual recording rate depends on the camera type and
the parameters set for the camera (e.g.: resolution,
compression setting). The average setting is 4 - 6 images per
second.

Table of Contents

Related product manuals