DiBos/DiBos Micro Default Configuration | en 75
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
6.5.3 Configuring Alarm Simulation
Inputs and outputs menu > Alarm simulation tab
The video system supports 4 inputs for the triggering of user alarms in the user interface.
1 Alarm simulation Click the tab.
2 Type Click the down arrow in the column and select
whether an input is to be activated or not.
Input is to be used for alarm simulation.
Input is not to be used for alarm simulation.
3 Name Place the cursor in the column and enter the name.
4 Save The entries are saved.
To Next Page
Loading...
