74 en | Default Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
6.5.2 Configuring Relay Outputs
Inputs and outputs menu > Relay tab
The number of relay outputs depends on the model. In DiBos there are a maximum of 16 relay
outputs available and in DiBos micro, 12 relay outputs. The relays can be activated locally,
from a remote station, via a job or via a browser.
1 Relay Click the tab.
2 Type Click the down arrow in the column and select
whether an output is to be activated or not.
The relay output is activated.
A malfunction relay can be connected to the relay
output.
Note:
Only one malfunction relay can be connected. The
events that trigger the malfunction relay can be found
in the Connecting a Malfunction Relay chapter in the
installation handbook
The relay output is not activated.
3 Name Place the cursor in the column and enter the name.
4 Save The entries are saved.
To Next Page
Loading...
