DiBos/DiBos Micro Default Configuration | en 115
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
6.13.2 Notification via SNMP
The following events lead to notification:
– The camera does not deliver a video signal
– The logbook cannot be created or written
– Database server could not be started
– Hard disk failure: Drive X deactivated, drive X not deactivated
– The hard disk is full (protected data)
– Internal database error
– Live image and reference image differ
– Scene is noisy
– Scene too dark
– Scene too bright
– Relay activated
– Relay not activated
– Internal malfunction or malfunction of external hard disks (e.g. malfunction relay has
triggered, hard disk is full)
– Inputs activated (all DiBos inputs)
– Inputs deactivated (all inputs)
To Next Page
Loading...
