36 en | Quick Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
5.4 Specifying Cameras
System menu > Configuration wizard > Next
The dialog box displays all video inputs of the grabber cards present. Cameras already
connected are recognized automatically.
1 Connected cameras Activate the check box of the desired video input to add
cameras that have been connected later.
2 Update Click the button to display cameras that have been
connected after the wizard has started.
3 Rename camera Select the camera whose name you want to change and click
the button. Then enter the new name.
4 Preview Shows the image from the selected camera.
5 Finish Saves the settings and finishes the wizard.
Next Click Next to continue.
To Next Page
Loading...
