52 en | Default Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
6.2.5 Configuring Video Monitors
Video and audio connections menu > Monitors section > Configure button
Specify the text display and the default camera sequence for the video monitors.
1 Text display Select what should be shown on the monitors, for example
camera name, date and time, etc.
2 Text position Select where on the monitor the display should be.
3 Text color Select what the display should look like, e.g. white on black
background.
4 Monitor A/Monitor B The default camera and sequence selected here can be
started in the live image.
Default camera Select which camera should be displayed as standard.
Configure sequence Click the button if you want to specify a default camera
sequence. A dialog box opens. Make your selection here (see
also Section 6.2.6 Configuring camera sequence).
5 Display default camera Check box activated: After you have logged off, the camera
selected under Default camera is displayed on monitor A/
monitor B.
Check box is not activated: After you have logged off, the
camera sequence selected under Configure sequence is
displayed on monitor A/monitor B. In the event of an alarm,
the appropriate alarm sequence is displayed.
6 OK The entries are saved.
To Next Page
Loading...
Need help?
General
