DiBos/DiBos Micro Default Configuration | en 53
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
6.2.6 Configuring camera sequence
Configuring default camera sequence:
Video and audio connections menu > Monitors section > Configure button > Configure
sequence button
Configuring alarm sequence:
Alarm processing menu> Monitor control section > Edit button
1 Add Click the button. A dialog box opens. Select the cameras and
the display duration that you want to add to the sequence.
Note: JPEG and MPEG IP cameras cannot be selected.
2 Edit Click the button. A dialog box opens. Make the changes here.
3 Delete Deletes the camera from the sequence. First select the
camera in the list field.
4 Changes the order of the cameras in the sequence. To do so,
select the camera in the list field and click the up or down
arrow.
5 OK The entries are saved.
To Next Page
Loading...
