66 en | Default Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
Specify recording quality for analog cameras
Recording settings menu > Camera x - y tab > Quality levels... button
or
Options menu > Quality levels button
(see also Section 6.3 Configuring Recording Settings)
In this dialog box you can edit an existing recording quality or add a new recording quality.
Pre-defined standard values of the quality levels:
1 List of existing recording qualities.
2 Add Adds a new recording quality.
3 Remove Removes an existing recording quality. To do so, select the
name.
4 Rename Changes the name of a recording quality. To do so, select the
name.
5 Image format Select the image format.
6 Bit rate [KBit/s] If necessary, activate this check box and enter a maximum
value for the bit rate.
Note:
If a function is not activated, the bit rate is variable.
7 Quality level: Activate the check box and select the quality level (2 =
highest quality level, 30 = lowest quality level).
Note:
If a function is not activated, the standard values are
adopted.
8 OK The entries are saved.
Recording quality Image format Quality level
Excellent 4CIF 4CIF 4
Very good 4CIF 4CIF 6
Excellent 2CIF 2CIF 4
Very good 2CIF 2CIF 6
Good CIF CIF 10
Normal CIF CIF 15
To Next Page
Loading...
