DiBos/DiBos Micro Default Configuration | en 65
Bosch Sicherheitssysteme GmbH Installation Guide F.01U.033.308 | V7 | 2009.09
5 Continuous recording Make the settings for continuous recording.
Rate: Select the recording rate.
Note:
The value 0 means no recording.
Quality: Select the recording quality.
Audio: Activate this check box if audio is also to be recorded.
6Assigned grabber
power:
The system calculates, per camera tab and time profile, the
sum of the recording rates for continuous and motion
recording.
Note:
If the result exceeds the grabber power (more than 100%),
the user cannot save the settings.
7 OK The entries are saved.
To Next Page
Loading...
