32 en | Quick Configuration DiBos/DiBos Micro
F.01U.033.308 | V7 | 2009.09 Installation Guide Bosch Sicherheitssysteme GmbH
2 Time and date formats Specify the time and date formats here.
Time format: Enter the type of time display.
h = hours; m = minutes; s = seconds; t = morning/afternoon
(e.g. AM/PM)
h = 12 hours; H = 24 hours
hh, mm, ss = representation with leading zero
(representation with 2 digits)
h, m, s = representation without leading zero
Date format: Enter the type of date display.
d = day; M = month; y = year
dd, MM = representation with leading zero
yy = for example 05; yyyy = for example 2005
Time: Current time.
Date: Current date.
3 Time zone Lists the available time zones.
Set clock to automatic
summer/winter time
changeover
Activate this function if the system time is to change
automatically to summer and winter time.
4 Computer name Enter the name. This name identifies the video system in the
network.
Note:
The computer name must not be assigned more than once. If
the computer name is assigned more than once, a yellow
flashing bar appears under the computer symbol in DiBos
Explorer and the cameras are crossed off.
If the name is changed, the system must be shut down
manually when the wizard finishes. The system is then
restarted automatically.
5 Configuration Loads a previously created configuration, for example from a
USB memory stick.
Load Click the button to load a configuration.
6 Finish Saves the settings and finishes the wizard.
Next Click Next to continue.
To Next Page
Loading...
Need help?
General
