If Zone 2 activates an alarm, the Swinger Shutdown Count for Zone 2 is incremented to 1.
Swinger Shutdown Count for Zone 1 is still 5. If Zone 1 reactivates again, it locks out Zone 1
from activating the report. When smart lockout is enabled, if any zone activates the siren
before siren running time is expired, Zone 1 reactivates and can still send a report.
STAY Mode 2 Automatically Bypass Zones
STAY Mode 2 Automatically Bypass Zones can be programmed in Location 381 - 384. It can
also be done by master code function. Refer to Setting STAY Mode 2 Bypass Zones, page 47 for
more information.
Zone 9 – 16 is only for Solution 3000.
Item Location Option Default New
STAY Mode 2
Automatically Bypass
Zones
0381 1 = Zone 1
2 = Zone 2
4 = Zone 3
8 = Zone 4
0
0382 1 = Zone 5
2 = Zone 6
4 = Zone 7
8 = Zone 8
0
0383 1 = Zone 9
2 = Zone 10
4 = Zone 11
8 = Zone 12
0
0384 1 = Zone 13
2 = Zone 14
4 = Zone 15
8 = Zone 16
0
Zone Status Reporting Options
Item Location Option Default New
Zone Status Reporting
Options
0392 0 = No Zone status reports allowed
1 = Report to Receiver 1
2 = Report to Receiver 2
3 = Report to Receiver 3
4 = Report to Receiver 4
5 = Report to Receiver 1,2,3,4
6 = Report to Receiver 1 (2,3,4 backup)
7 = Report to Receiver 1 (2 backup) and
Receiver 3 (4 backup)
1
This location is set by default to report only to Receiver 1.
13.6
13.7
106 en | Zone Information Control Panel
2017.10 | 03 | F.01U.298.026 Installation Guide Bosch Security Systems, Inc.
To Next Page
Loading...
Need help?
General
