These locations allow you to activate call diversion automatically on your telephone when you
arm the system in AWAY Mode.
When the Telco Arming Sequence is activated after arming the system in AWAY Mode, the
control panel redirects all calls to your mobile phone.
Contact your telecommunications provider for more information on Call Forward operations.
Digit Required Number to Program Digit Required Number to Program
0 0 8 8
1 1 9 9
2 2
3 3 * * 1
4 4 # * 2
5 5 4-sec Pause * 3
6 6
7 7 Terminator * 5
Table 11.3: Dialing Digits
To turn call forward (immediate) on, enter:
[* 2 1][forwarding telephone number][#]
Example
To immediately forward all incoming calls to the telephone number 96721055 after arming the
system in AWAY Mode, program:
[11 2 1 9 6 7 2 1 0 5 5 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15]
To turn call forward (no answer) on, enter:
[* 6 1][forwarding telephone number][#]
Example
To forward all incoming calls, when there is no answer, to the telephone number 96721055
after arming the system in AWAY Mode, program:
[11 6 1 9 6 7 2 1 0 5 5 12 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15]
Telco Disarming Sequence
Item Location Option Default New
Telco Disarm Sequence
(Call Forward Off)
0143 - 0158 15 = Telephone termination 15
These locations allow you to deactivate call diversion automatically on your telephone when
you disarm the system from AWAY Mode.
To turn call forward (immediate) off, enter:
[# 2 1 #]
Example
To disable call forward (immediate) after disarming the system from AWAY Mode, program:
[12 2 1 12 15 15 15 15 15 15 15 15 15 15 15]
To turn call forward (no answer) off, enter: [# 6 1 #]
Example
To disable call forward (no answer) after disarming the system from AWAY Mode, program:
[12 6 1 12 15 15 15 15 15 15 15 15 15 15 15]
11.13
74 en | Communication Information Control Panel
2017.10 | 03 | F.01U.298.026 Installation Guide Bosch Security Systems, Inc.
To Next Page
Loading...
Need help?
General
