What does 'Top of form' error mean on my Brady BMP 71 Label Maker?
The 'Top of form' error on your Brady Label Maker usually indicates a jam. Clear any jams by opening the printer cover and removing excess labels. Also, the notch sensors in the lower printer frame might be dirty. Clean the sensors in the lower printer base. After addressing these issues, press [CLEAR/ESC] to clear the error.
Why does my Brady BMP 71 keep powering off?
Your Brady Label Maker might be shutting off frequently due to: * Low battery: Connect the AC adapter to supply power and charge the battery simultaneously. * Auto shutoff settings: Adjust the Shut Off Delay timing in the Setup>Config menu.
What to do if my Brady BMP 71 says 'Out of Media'?
The 'Out of Media' error on your Brady Label Maker can be caused by: * Exhausted media supply: Replace the label/media roll and press [CLEAR/ESC]. * Incorrect installation: Reinstall the labels/media and press [CLEAR/ESC]. * Dirty sensors: Clean the notch sensors in the lower printer frame and press [CLEAR/ESC]. * Memory device issue: Replace the label/media or label/media roll holder and press [CLEAR/ESC].
How to fix 'Cover not closed' error on Brady Printer?
The 'Cover not closed' error on your Brady Printer indicates that the printer cover is not fully latched. Push down firmly on the cover until you hear it latch. The cover should line up evenly with the printer case.
What to do if my Brady Label Maker says 'No ribbon installed'?
The 'No ribbon installed' error on your Brady Label Maker can occur due to: * No ribbon or incorrect installation: Press the [CLEAR/ESC] key, then ensure the ribbon is correctly installed. * Damaged ribbon cartridge: The circuit board on the ribbon cartridge may be damaged. Try replacing the ribbon cartridge. * Damaged printer contacts: The printer contacts for reading the ribbon cartridge may be damaged.
Why does my Brady Label Maker say 'Out of ribbon'?
This error on your Brady Label Maker can occur for several reasons: * The ribbon supply has run out. Replace the ribbon cartridge and press the [CLEAR/ESC] key. * There's excessive slack in the ribbon cartridge. Tension the ribbon by rotating the rewind spool downward until the slack is removed, then press [CLEAR/ESC]. * The ribbon is broken. Replace the ribbon cartridge and press [CLEAR/ESC]. * A label or ribbon jam has occurred. Clear any jams by opening the printer cover and removing excess labels, then press [CLEAR/ESC]. * The ribbon cartridge memory device has counted down to zero. Replace the ribbon cartridge and press [CLEAR/ESC].
What to do if Brady Printer keyboard works intermittently?
If the keyboard on your Brady Printer works intermittently or not at all, one or more keys might be stuck in a depressed state. Identify any keys stuck in the down position and repress the key to unstick it.
Why does my Brady Printer say 'Head over temp'?
The 'Head over temp' message on your Brady Printer indicates that the print head is too hot. Let the printhead cool down for approximately 10 minutes, then re-initiate the print job.
What to do if Brady Printer screen freezes?
If your Brady Printer screen freezes, it may be due to a user interface error. Here's how to resolve it: 1. Press the Power button to turn the printer off. If the Power button doesn't work: 2. Remove the AC adapter (if you're using one). 3. Remove the battery pack, then immediately re-insert it. 4. Power ON the printer.
What to do if my Brady Printer does not power up?
If your Brady Printer doesn't power up when turned on, the battery pack might not be charged. Attach the AC adapter to the printer and plug it into an electrical outlet. This will supply immediate power while simultaneously charging the battery.
Lists all items included in the BMP71 printer packaging.
Instructions for registering the printer online for support and updates.
Instructions on how to download and install firmware updates for the BMP71.
Step-by-step guide for inserting the battery into the printer.
Step-by-step guide for removing the battery from the printer.
Information on using the AC adapter for charging and operation.
Instructions for connecting the AC adapter to the printer and power outlet.
Detailed steps for installing the printer driver on a Windows PC.
Instructions for downloading printer drivers from Brady's website.
Step-by-step instructions for inserting a ribbon into the printer.
Step-by-step instructions for removing a ribbon from the printer.
Step-by-step guide for inserting label rolls into the printer.
Step-by-step guide for removing label rolls from the printer.
Explains the function of navigation and editing keys.
Details key combinations for text editing like backspace, delete, and caps lock.
Explains the usage of Time, Print, Adv Print, Print Preview, and Feed keys.
Describes the functions of keys like Font, Label, Area, Symbol, Serial, Barcode, File, Apps, and Setup.
Lists shortcuts for common operations and navigation.
How to select and activate menu items and sub-menus.
How to select options from drop-down lists in dialog boxes.
How to select or deselect radio buttons and option boxes in dialogs.
How to accept and apply changes made in a dialog box.
How to exit without saving changes.
How to configure font type and size within the printer setup menu.
Instructions for selecting the display language for menus and prompts.
Details on setting up barcode symbology, ratio, height, and human readability.
How to set the date and time for accurate timestamping.
How to manage and select available printer applications.
Setting up color standards and default categories for applications.
How to adjust printer configuration settings like brightness and shut-off delay.
Instructions and benefits of cleaning the printer's internal parts.
Detailed steps for cleaning the cutter blade and internal sensors.
How to input and modify text on labels, including insertion and deletion.
Using Clear/Esc, clearing data options, and canceling functions.
Understanding error messages and managing default label settings.
Adjusting font size and utilizing the autosize feature for label text.
Instructions for printing the current label and cutting it.
How to apply font styles, sizes, and attributes like bold, italics.
Detailed steps for selecting font sizes and applying styles.
How to manually input a custom font size within a given range.
How to apply attributes like bold, italics, and underline to text.
How to apply formatting attributes to text that has already been entered.
How to adjust character spacing for expanded or condensed text.
How to manually enter custom percentages for text expansion or condensation.
How to format characters above or below the text line, including multi-character application.
How to insert the current date and time onto a label.
How to apply different formatting to specific areas of a label.
Instructions for adding new labels or areas to a label file.
How to set a fixed label length for continuous media.
How to move between different labels or areas in a file.
How to remove unwanted labels or areas from a label file.
How to apply horizontal and vertical justification to label data.
How to rotate label content by 90-degree increments.
How to add borders or frames to labels and areas.
How to remove existing frames from labels or areas.
How to invert foreground and background colors for text.
How to turn off reverse formatting.
How to display text characters vertically.
How to revert vertical text back to horizontal format.
How to zoom in or out to view label details.
Details on barcode symbology, ratio, height, width, and human readability.
Step-by-step instructions for adding a barcode to a label.
How to modify the data within an existing barcode.
How serialization works, including simple, linked, and multi-sequence types.
Illustrates simple, combined, and multiple serialization examples.
How to use leading zeros for better alignment in sequences.
Step-by-step guide for setting up serialization parameters.
How to configure two independent or linked serialization sequences.
How to modify the start, end, and increment values of a sequence.
Steps to save the current label data as a file.
Detailed steps for saving a label file, including overwriting.
How to recall and load previously saved label files.
How to remove saved label files from the printer.
How to view a label file before sending it to print.
How to navigate long labels or multiple labels in preview mode.
How to access advanced print options like copies and collating.
How to print multiple copies of a label, collated or non-collated.
How to use separators and mirror images for labels.
How to select and launch an application from the menu.
How to modify settings within an application.
How to clear data while retaining application formatting.
How to revert application settings to their defaults.
How to exit an application, with options to save data.
How to restart an application with new settings.
How to re-edit application settings through a dialog box.
Table showing which applications support adding labels or areas.
How to use applications for repeating text on labels for wires and cables.
How to use applications for terminal blocks and 66 blocks.
How to create flag labels that wrap around wires or cables.
How to create labels for patch panels.
How to use label types for 110-block and Bix block configurations.
How to use pre-designed safety templates for labels.
How to use general templates for various label designs.
How to label pipes and conduits according to standards.
How to create labels with directional arrows for pipes.
How to create rollform pipemarkers with repeated text and graphics.
Guide showing recommended and acceptable material/ribbon combinations.
Information on using older label media with the BMP71 printer.
How to attach the adapter for using TLS2000/HandiMark labels.
Solutions for hardware-related issues like overheating and key malfunctions.
Solutions for printer power issues and freezing screens.
Solutions for issues affecting print quality, such as poor print or missing text.
Solutions for common ribbon-related errors and issues.
Solutions for issues related to label feeding and media installation.
Solutions for errors related to application compatibility and settings.
General| Print Resolution | 300 dpi |
|---|---|
| Print Technology | Thermal transfer |
| Cutter | Automatic |
| Keyboard | QWERTY |
| Display | LCD |
| Power Source | Rechargeable battery, AC adapter |
| Weight | 2.5 lbs |
| Print Speed | 1.5 inches per second |
| Label Width | 0.25 to 2.0 inches |
| Supported Materials | Vinyl, Polyester |
| Connectivity | USB, Wi-Fi |
To Next Page
