CAUTION!
Always make sure the water chamber is in correct position before use.
Store the airway bypass unit in a clean and dust free environment.
5.12.9.3 Activating the Humidification
The water chamber must be installed in order to access the humidifier setting on the ventila-
tor menu, both in clinical and home mode. If the water chamber is disconnected and recon-
nected after usage, the ventilator will remember the humidity setting used.
The click-in humidifier only operates during treatment. When the ventilator is in standby
mode, the humidification is paused.
Prerequisites
• The water chamber shall be filled with water and attached.
• The ventilator shall be connected to the mains power supply
74
How to Use the Nippy 4
User Manual
Doc. 006553 M-6
To Next Page
Loading...
