Brother HL-5350DN

3-24
Confidential
■ REPLACE PF KIT1 (2, 3, MP)
PF kit 1 (2, 3, MP) is the time for replacement.
■ SIZE ERROR DX
Specified paper size is not supported for duplex printing.
■ SIZE MISMATCH
Mismatch between specified paper size from the driver and setting paper in the tray.
■ STORAGE FULL
Memory full.
■ TOO MANY TRAYS
Option tray is installed more than three.
Step Cause Remedy
1
PF kit 1 (2, 3, MP) is the time for
replacement
Replace the PF kit 1 (2, 3, MP) and reset
the counter.(Refer to "2.2 Reset Parts Life
Menu" in Chapter 7.)
<User Check>
- Specify the paper size to A4/LETTER/FOLIO.
<User Check>
- Match specified paper size from the driver with setting paper in the tray.
<User Check>
- Install additional DIMM memory.
Step Cause Remedy
1 Main PCB ASSY failure Replace the main PCB ASSY.
<User Check>
- Install the option tray to less than two.
Step Cause Remedy
1 Connector: 54702-1219 failure Replace the connector: 54702-1219.
2 Main PCB ASSY failure Replace the main PCB ASSY.