Name: Brother MFC-8480DN - B/W Laser - All-in-One
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

6-1

Confidential

1. IF YOU REPLACE THE MAIN PCB

■ Rewriting the Firmware (Main Firmware, Sub Firmware (PCL/PS))

■ EEPROM Customizing of the Main PCB (Maintenance Mode: Code 74)

■ EEPROM Parameter Initialization of the Main PCB

(Maintenance Mode: Code 01)

■ Operational Check of Control Panel Button (Maintenance Mode: Code 13)

■ Operational Check of Sensors (Maintenance Mode: Code 32)

■ Acquisition of White Level Data and Set the CCD Scanner Area

(Maintenance Mode:Code 55)

■ Setting the Serial Number

■ Setting the Toner Cartridge Type

■ Scanning and Printing Check

■ ROM Version Check (Maintenance Mode: Code 25)

■ Operational Check of Fans (Maintenance Mode: Code 78)

■ Backup to the Main PCB of the Wireless LAN PCB Information

(WLAN model only)

(1) Computer (Windows

. XP/2000)

Create a folder on the C drive, for example:- (ALe FIRMWARE)

(2) A USB flash memory drive

(3) The Firmware (Main Firmware/Sub Firmware)

(4) The Maintenance Tool (Mainte.EXE)

Copy it into the folder that has been created on the C drive. Extract the copied file and

run “brmainte.exe” file by double-clicking it.

(5) A USB cable

(6) The Download Utility (FILEDG32.EXE)

Copy it into the folder that has been created in the C drive.

(7) The Brother Maintenance USB Printer Driver

Copy it into the folder that has been created on the C drive and extract the copied file.

LZXXXX_$.djf or LZXXXX_$.upd

LZXXXX: First six digits are a parts number of the firmware.

$: Alphabet representing the revision of the firmware.

Other manuals for Brother MFC-8480DN - B/W Laser - All-in-One

Questions and Answers:

Need help?

Do you have a question about the Brother MFC-8480DN - B/W Laser - All-in-One and is the answer not in the manual?

General