Name: Brother MFC-8480DN - B/W Laser - All-in-One
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

7-34

Confidential

4.16 Acquisition of White Level Data and CCD Scanner Area Setting

(Function code 55)

This function allows the machine to obtain white level data for the scanner module and save

it together with the scanner module area into the EEPROM on the main PCB.

(CCD model)

(1) Press the [5] key twice in the initial stage of the maintenance mode.

"PRESS START" will appear on the LCD.

(2) Press [START] button, then "SCANNER AREA START" will appear on the LCD.

(3) When setting of the scanner area is completed, a 4-digit number will appear on the LCD.

(e.g., 4723)

* If you press the [Stop/Exit] button at this point, the machine will beep for one second

and return to the initial stage of the maintenance mode.

Enter the input data value of a 5-digit number based on the 4-digit number to be

displayed referring to the table below. (e.g., 4723

→ 47247)

(4) The machine saves the magnification compensation setting value into the EEPROM,

and then it beeps for one second and returns to the initial stage of the maintenance

mode.

Other manuals for Brother MFC-8480DN - B/W Laser - All-in-One

Questions and Answers:

Need help?

Do you have a question about the Brother MFC-8480DN - B/W Laser - All-in-One and is the answer not in the manual?

General