Name: Brother MFC-8480DN - B/W Laser - All-in-One
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

7-48

Confidential

5.3 Drum condensation countermeasure mode

The printing spots may occur with the condensation of the surface of the drum in the high

humidity environment. When the drum condensation countermeasure mode is set to ON to

follow the procedure described below, you can remedy the condensation of the surface of the

drum in drying by heat of the fuser unit.

(1) Open the front cover.

(2) Press the [Enlarge/Reduce] button.

The LCD shows the

“LONG WARMUP MODE

1. On

2. Off ”

(3) Select the “ON” or “OFF” by pressing the [1] or [2] button, and press the [OK] button.

The LCD shows the “Accepted”, and the machine returns to the standby status.

5.4 Unlocking and Clearing the Password of the Function Lock / Setting Lock

■ How to clear the password

The user's can not clear the password that registered by operation of the panel. Perform

the following procedures to clear the registered password.

(1) Press the [Menu], [#], [2], [7], [9], [0] and [0] button in this order in the ready state.

The “0” will appear on the LCD.

(2) The registered password is cleared, and the machine returns to the ready state.

5.5 Clearing the Data of the Secure Print

If forgot the password of the Secure Print, turn the power switch off and then turn it on again

to clear the printing data.

Other manuals for Brother MFC-8480DN - B/W Laser - All-in-One

Questions and Answers:

Need help?

Do you have a question about the Brother MFC-8480DN - B/W Laser - All-in-One and is the answer not in the manual?

General