Name: Brother MFC-8480DN - B/W Laser - All-in-One
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

7-28

Confidential

4.12 Switching the USB Setting (Function code 45)

If a Vista supported PC connect with a USB device by USB full-speed 2.0, the PC's operation

system may be unable to recognize the serial number of the USB device depending on the

PC and the USB device. In that case, the virtual printing port for USB will increase

continually whenever the PC connects to the USB device. This function can solve the

problem by switching the return value of serial number to "0".

• USBNo.=ON: Return to the serial number of the machine.

• USBNo.=OFF: Return to the "0".

(1) Press the [4] and [5] keys in this order in the initial stage of the maintenance mode.

The “USBNo.=ON” will appear on the LCD.

(2) Press the [OK] button. and select the “USBNo. = ON” or “USBNo. = OFF” by pressing

the [ ] or [ ] button. And press the [OK] or [Start] button. The machine beeps for

approx. one second, and return to the initial stage of the maintenance mode.

Other manuals for Brother MFC-8480DN - B/W Laser - All-in-One

Questions and Answers:

Need help?

Do you have a question about the Brother MFC-8480DN - B/W Laser - All-in-One and is the answer not in the manual?

General