Name: Brother MFC-8480DN - B/W Laser - All-in-One
Brand: Brother
Rating: 4 (1 reviews)

To Next Page

To Previous Page

2-27

Confidential

<When a toner cartridge in use is inserted after "Replace Toner" is displayed

by toner sensor detection

A count value before changes is continuously indicated as a number of the rotation for the

develop roller. Irrespective of the amount of toner, printing becomes disabled when the

number of the rotation for the develop roller reaches the upper limit.

Excluding a toner cartridge in use in which there is a little toner remained.

The developing bias voltage is reset to the initial setting once when a toner cartridge in use

is inserted.

Corresponding counter, Setting value Operation

Counter of toner cartridge changes No count up

Page counter for each toner cartridge Continued

Coverage for each toner cartridge Continued

Developing bias voltage Reset (Initial setting)

Note :

• The discrimination between new and secondhand toner cartridges refers to the new

toner detection to be heretofore described.

Other manuals for Brother MFC-8480DN - B/W Laser - All-in-One

Questions and Answers:

Need help?

Do you have a question about the Brother MFC-8480DN - B/W Laser - All-in-One and is the answer not in the manual?

General